Industrial Coatings

Benjamin Moore’s Corotech Industrial coatings are engineered to perform under the most extreme circumstances. Our Corotech Industrial coatings are rigorously tested and guaranteed to outperform our competition. Because different surfaces require different preparations and coatings, it is important to discuss your home’s materials – whether metal, aluminum, copper, steel, tile, concrete or wood – with your local Shelby Paint & Decorating paint expert.

Acrylic DTM Enamel — Semi-Gloss

Acrylic DTM Enamel — Semi-Gloss

V331

Acrylic DTM Enamel is a high performance, one component, direct to metal acrylic finish formulated for application to a wide variety of metals and other substrates, either direct or as a UV resistant finish applied over primer. This product out performs most “DTM” systems on the market, having far superior resistance to moisture throughout the coating life.

  • Chemical inhibitors prevent flash rusting when applied to ferrous metal
  • For metal, wood and masonry substrates
  • Flash rust resistant and corrosion protection on ferrous metals
  • For Interior and Exterior use
  • Excellent for all corrugated metal sheeting
  • Meets Performance Requirements of TT-P-1511
Quick Dry Alkyd Enamel — Gloss

Quick Dry Alkyd Enamel — Gloss

V230

Quick Dry Alkyd Enamel is a high performance, single component, quick-dry, rust preventative enamel formulated for use on ferrous metal substrates. It provides corrosion resistance for both interior and exterior steel surfaces. Not recommended for non-ferrous metals such as galvanized, aluminum unless properly primed, Quick Dry Alkyd Enamel may be applied to new or properly prepared, rusted surfaces.

  • Fast 15 minute dry
  • Low VOC
  • No Orange Peel
  • Airless or HVLP Systems
  • Hard scratch and impact resistant coating
  • Recommended for interior and exterior metal
  • For all ferrous metal surfaces
Silicone Alkyd High Heat Aluminum

Silicone Alkyd High Heat Aluminum

V264

Silicone Alkyd High Heat Aluminum is designed to protect steel that is exposed to heat ranges up to 800° F (425° C). This product exhibits excellent weathering, resists mild industrial chemicals and moisture and is specific to industrial use.

  • High heat resistance allows for use on industrial machinery
  • Hot metal ducting and exhaust vents
  • Fast dry; quick return to service
  • Uses include heat stacks, boiler jackets, heat exchangers, drying kilns, and incinerators
  • Not for interior residential use

Water Reducible Alkyd

V210

Water Reducible Alkyd is a water-thinned industrial enamel offering the application and performance characteristics of a conventional alkyd enamel without the odor and solvent clean-up normally associated with these products.

  • Ease of application.
  • Exceptional flow allows for an aesthetically pleasing finish.
  • Excellent protective qualities when used in interior or exterior applications.

Pre-Catalyzed Waterborne Epoxy — Semi-Gloss

V341

Pre-Catalyzed Waterborne Epoxy Semi-Gloss is extremely durable and easy to use. It is a single-component epoxy that performs as well as its two-component counterparts, yet without the fumes, pre-mixing, and limited application times. This semi-gloss finish is well suited to moderately severe industrial exposures and high-traffic areas that require frequent cleaning. (Not suitable for use on floors.)

  • For all metal, wood, masonry and drywall substrates
  • Superior Abrasion and Scrub Resistance
  • Excellent resistance to cleaners and detergents
  • Suitable for use in USDA Inspected Facilities
  • Excellent resistance to stains, dirt and soil

Pre-Catalyzed Waterborne Epoxy — Eggshell

V342

Pre-Catalyzed Waterborne Epoxy is extremely durable and easy to use. It is a single-component epoxy that performs like its two-component counterparts, yet without odor. This eggshell finish is well suited for moderately severe industrial exposures and high-traffic areas that require frequent cleaning. (Not suitable for use on floors.)

  • For all metal, wood, masonry and drywall substrates
  • Superior Abrasion and Scrub Resistance
  • Excellent resistance to cleaners and detergents
  • Suitable for use in USDA Inspected Facilities
  • Excellent resistance to stains, dirt and soil

Sign Up For Our Color Club Today!

Get 1 Free Motor City Paint pint sized color sample for signing up for the Shelby Paint & Decorating Color Club to receive news on specials, promotions, and more. It's free and full of valuable coupons, tips, and more!




Join Our Most Valuable Painter Club!

For professional licensed painters only. Stay informed, earn rewards & get exclusive discounts!